How to protect and inspect to make the excavator hydraulic crusher more durable

The hydraulic clamp of the excavator is like a big mouth of a blood bowl used to bite things. With its teeth, it can bite a solid reinforced concrete building and hard metal to achieve the purpose of cutting, crushing and dismantling. Very efficient, the efficiency is two to three times that of the hammer, quite domineering! The hydraulic clamp consists of a caliper body, a hydraulic cylinder, a movable jaw and a fixed cymbal, and a slewing mechanism. The external hydraulic system provides oil pressure to the hydraulic cylinder, so that the hydraulic smash The movable jaws of the tongs and the fixed cymbals are combined one by one to achieve the effect of smashing objects. The slewing mechanism can be easily operated with a suitable angle. It is the same as the installation principle of the hydraulic breaker. The pin hole of the hydraulic crusher is connected with the pin hole of the front end of the excavator, and the pipe on the excavator is connected with the hydraulic crusher. After the installation, the crushing operation can be performed. It is.

Although the hydraulic clamp of the excavator has the characteristics of simple operation and high mechanical strength, it can only ensure its production efficiency if it is used according to the safety operation rules. The following is a detailed introduction to the safe operation procedures of hydraulic clamps for excavators. Interested friends can come to pay attention.

1. The operator of the hydraulic clamp of the excavator must be familiar with the structure, performance and usage rules of the equipment.

2. Check all important parts of the hydraulic shear before work to keep the machine and the surrounding area clean and the wires insulated.

3. The staff should check the shaft and locking screws of the hydraulic shear of the excavator every day. If it is loose, it should be adjusted in time.

4. Do not extend any part of your hand or body into the underside of the knife or other rotating parts to avoid accidents.

5. If the machine is found to be not working properly during use, it should be stopped immediately.